BHZYP - 267835,6 GLASS BEADS ABRASIVE 80 & 120 MICRON
- MSDS: BHZYP
- Manufacturer: J F JELENKO AND CO
- Product Name: 267835,6 GLASS BEADS ABRASIVE 80 & 120 MICRON
- National Stock Number: 6520-00F011039
Product Identification
Product ID:267835,6 GLASS BEADS ABRASIVE 80 & 120 MICRON
MSDS Date:03/25/1988
FSC:6520
NIIN:00F011039
MSDS Number: BHZYP
Responsible Party
ARMONK, NY 10504
Emergency Phone: (914) 273-8600
Info Phone: (914) 273-8600
Preparer: M. KRAMER
Cage: FO395
Contractor
Telephone: (914) 273-8600
Cage: FO395
Ingredients
AMORPHOUS FUSED SILICA, SILICON DIOXIDE (SIO2), QUARTZ
CAS: 60676-86-0
RTECS: VV7320000
Fraction By Weight: 70-75%
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
SODIUM DIOXIDE
CAS: 1313-60-6
RTECS: WD3450000
Fraction By Weight: 10-15%
CALCIUM OXIDE
CAS: 1305-78-8
RTECS: EW3100000
Fraction By Weight: 8-10%
OSHA PEL 5 MG/M3
ACGIH TLV: 2 MG/M3; 9192
MAGNESIUM OXIDE
CAS: 1309-48-4
RTECS: OM3850000
Fraction By Weight: 2-3%
OSHA PEL 15 MG/M3 PARTICULATE
ACGIH TLV: 10 MG/M3;TDUST; 9293
ALPHA-ALUMINA (ALUMINUM OXIDE) (EPA LISTS ONLY FIBROUS
CAS: 1344-28-1
RTECS: BD1200000
Fraction By Weight: 1-3%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE MILD IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES: MAY CAUSE MILD IRRITATION.
First Aid
First Aid:INGESTION: GET MED ATTN. SKIN: FLUSH W/SOAP & WATER. EYES:
FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES. USE EYEDROPS IF
IRRITATION PERSISTS. INHALATION: REMOVE TO FRESH AIR.
Fire Fighting
Extinguishing Media:MATERIAL IS A NATURAL FIRE RETARDANT.
Fire Fighting Procedures:NONE
Accidental Release
Spill Release Procedures:SWEEP OR SCOOP UP & REMOVE. ROUND PARTICLES
MAY BE SLIPPERY WHEN SPILLED ON FLOOR.
Handling
Handling and Storage Precautions:WASH THOROUGHLY AFTER HANDLING. AVOID
GENERATING DUST.
Exposure Controls
Respiratory Protection:NOT REQUIRED FOR NORMAL USE.
Ventilation:USE W/ADEQUATE VENTILATION. VENTILATION NOT REQUIRED WHEN
USED TO CLOSED BLASTING CABINETS.
Protective Gloves:ANY TYPE
Eye Protection:SAFETY GLASSES, GOGGLES
Other Protective Equipment:NONE REQUIRED FOR NORMAL USE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
Chemical Properties
Spec Gravity:2.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIGHT COLOR POWDER, ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ALKALIS & HYDROFLUORIC ACID
Disposal
Waste Disposal Methods:DISPOSE OF AS INERT MATERIAL IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL AUTHORITIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.